Fair Appliance Repair Service repairs electric, induction, gas, and glass-ceramic cooktops across Sacramento, fixing burners that won't ignite or heat, a burner stuck on high, dead touch controls, and cracked surfaces, with same-day service in most cases. Owner-technician Sayed Sajadi holds California License #48671, is EPA Certified, and gives you a written price before any work begins.
A cooktop is the part of the kitchen you reach for several times a day, so when a burner won't light, an element stays cold, or the glass cracks, dinner stalls fast. The fix depends entirely on what you cook on, a gas igniter, an electric element, an induction power board, and a sealed glass surface all fail in their own way and need their own diagnosis.
Fair Appliance Repair Service sends Sayed Sajadi, a licensed technician who has repaired Sacramento kitchens since 2020, straight to your home. He works on every cooktop type, pinpoints the real fault, and quotes it in writing before starting, with common parts already on the van for a one-visit fix.
This page is for built-in cooktops, the surface that drops into your counter. If you have a freestanding unit with an oven below, our range and stove repair in Sacramento page fits better, and for a built-in oven see wall oven repair in Sacramento.
Cooktop trouble usually comes down to a burner that won't heat, controls that won't respond, or a cracked surface. Here's what Sacramento homeowners call us about most, across gas, electric, and induction:
• Gas burner won't ignite: clicking with no flame, or no click at all, usually a clogged burner port, a weak spark igniter, or a failed spark module
• Electric coil or radiant element won't heat: the burner stays cold or black, often a burned-out element, a corroded receptacle, or a dead radiant heater under the glass
• Burner stuck on high: it scorches on the lowest setting, a shorted infinite switch sending full power, which is a safety issue to address quickly
• Induction won't heat the pan: no heat despite power, frequently non-magnetic cookware, off-center pans, or a failed induction coil or power board
• Cracked or shattered glass surface: a spider-web crack or hairline fracture, from thermal shock or impact, which can let moisture short the electronics below
• Dead touchpad or error codes: flashing codes like F5 or E1, or unresponsive touch controls, usually a failed control board or ribbon cable
• Induction shuts off mid-cook: a failing cooling fan letting the unit overheat and trip its safety shutdown
• Ghost clicking on gas: the igniter clicks with the knobs off, typically moisture or a shorted spark switch behind a kno
Some issues are a quick part swap; a cracked surface or a control-board fault needs a closer look. Tell us the cooktop type and symptom when you call, and we'll bring the right parts.
📞 Call (916) 333-8388 for same-day cooktop repair across Sacramento.
Induction cooktops are the fastest-growing type in Sacramento kitchens, and they fail differently from gas or electric because they heat the pan, not the surface. The most common "it won't heat" call isn't a fault at all, it's cookware: induction only works with magnetic pans, so if a magnet won't stick to your pot, the burner stays cold. A pan that's too small or off-center does the same thing.
When the cookware checks out, the real faults are electronic. A single zone that's dead usually means a failed induction coil or the power board driving it. Unresponsive touch controls point to the control board or a moisture-covered sensor surface. And an induction unit that powers on then shuts off mid-cook is almost always a failing cooling fan letting the electronics overheat and trip the safety cutoff.
These are not DIY repairs. The boards run high voltage and the diagnostics need the right tools, so Sayed tests the coil, power board, sensors, and fan to find the actual failure instead of swapping parts. We service induction cooktops from Bosch, Samsung, LG, GE, Thermador, and more, with OEM parts matched to your model.
A cracked glass or ceramic cooktop is usually a replacement, not a repair, and it's a safety issue you shouldn't ignore. Once the surface is cracked, chipped, or pitted, moisture from a boil-over or steam can seep into the high-voltage parts underneath and cause a dangerous short. On an induction model it's worse, because even a small crack can scramble the touch sensors built into the glass. Stop using a cracked cooktop, even if the burners still heat.
What's actually fixable depends on the damage. A tiny surface chip or scratch can sometimes be stabilized, but a crack that runs across the cooking zone means the glass top needs replacing. The good news is that on many models the glass surface is a replaceable part, so you don't have to buy a whole new cooktop. Replacing the glass on an electric unit typically runs $200 to $600, while induction glass runs $300 to $1,000 because of the integrated sensors.
Sayed can tell you on site whether your cooktop takes a replacement glass top and source the right part for your brand, or, if the unit is older and the glass plus labor approaches the price of a new cooktop, give you the honest math so you can decide.
We repair every built-in cooktop style sold in Sacramento, and knowing your type helps us bring the right parts:
• Gas cooktops: sealed and open-burner models, where igniters, spark modules, and clogged burner ports are the usual faults
• Electric coil cooktops: the classic plug-in coil style, with element and receptacle-block failures
• Smooth-top radiant (ceramic glass): a glass surface over radiant heaters, including Schott Ceran tops, where the element or infinite switch is the common culprit
• Induction cooktops: magnetic-coil surfaces with electronic boards, touch controls, and cooling fans
• Downdraft cooktops: units with a built-in vent that pulls smoke down, adding a fan and damper to the usual cooktop parts
Most Sacramento kitchens run one of these, and each has its own failure points and parts. Whatever drops into your counter, tell us the type when you book and we'll arrive ready for it.
You'll know the cost and the plan before any tool comes out. Here's the visit, end to end:
1. Booking. Call (916) 333-8388 or book online. Tell us gas, electric, or induction, the brand, and the symptom, and Sayed loads the likely parts before heading out.
2. Diagnosis and a written price. He tests the right system for your type, igniters and spark modules on gas, elements and switches on electric, coils and boards on induction, then quotes the actual fault in writing. The diagnostic fee is waived when you go ahead with the repair.
3. The repair, usually the same visit. Common parts, igniters, elements, infinite switches, and control boards, are on the van and fitted with genuine OEM parts. A glass top or a brand-specific board on order means a quick return you approve first.
4. Full function test before we leave. Sayed runs every burner or zone through its range, checks the touch controls, and confirms there are no gas leaks on a gas unit or overheating shutdowns on induction.
One licensed technician handles your cooktop from diagnosis to the final test, so a control-board fault doesn't get misread as a cheaper part and leave you calling back.
Most cooktop repairs in Sacramento run $120 to $500 in parts and labor, with labor around $50 to $150 an hour. The cost depends heavily on the type: a gas igniter or electric element is a lower-cost fix, while an induction power board or a glass replacement sits at the top. Here's what the common jobs run in 2026:
These are typical Sacramento ranges for 2026, not a fixed quote. You get an exact written figure after the on-site diagnosis, and the service-call fee comes off the total when you proceed. For a cracked glass top or a failed induction board especially, we'll compare the repair against the price of a new cooktop and tell you honestly which is the better value.
📞 Call (916) 333-8388 for an upfront estimate on your cooktop.
We repair every major cooktop brand sold in Sacramento, across gas, electric, induction, and glass-ceramic. Sayed is factory-trained across brands, so the diagnosis and parts match your exact model:
Whether it's a Thermador Star burner that won't light or a Bosch induction zone that's gone dead, we match the part to the model. If your brand isn't listed, call (916) 333-8388 and we'll confirm parts and service before you book.
One licensed technician who works every cooktop type, from a gas Star burner to a high-voltage induction board, and stands behind the fix. Sayed Sajadi owns the company and runs every call himself:
• California License #48671, EPA Certified, and trained for both gas-safety work and induction electronics
• 4,000+ repairs since 2020 and 700+ five-star reviews from Sacramento customers
• BBB A+ rating, Google Guaranteed, and a 2024 Nextdoor Neighborhood Favorite
• Free diagnostic when you proceed, with a written, itemized price before any work
• Genuine OEM parts backed by a 1-year parts warranty and 90-day labor guarantee
• Same-day service in most cases, vans stocked with igniters, elements, switches, and boards
• Honest repair-or-replace advice when a cracked glass top or failed board nears the price of a new unit
Cooktops are easy to misdiagnose, since the same dead burner can be an igniter, a switch, or a control board depending on the type. The systematic, one-owner approach is what keeps you from paying for a part that was never the problem.
We cover Sacramento and the surrounding communities across Sacramento, Placer, and Yolo counties for cooktop repair, including:
• Citrus Heights
• West Sacramento
• Fair Oaks
• Rocklin
• Antelope
• North Highlands
• Orangevale
• Rio Linda
• Elverta
• Woodland
• McClellan Park
Don't see your area listed? Call (916) 333-8388 to check availability. We're a Sacramento-based mobile repair service and come to your home, so there's nowhere to drop your cooktop off, we bring the repair to you.
A cold burner or a cracked surface puts the whole cooktop out of action, and on a cracked glass or induction top, cooking on it risks a short in the electronics below. Most cooktop faults are sorted in a single visit, whether it's a gas igniter, an electric element, or an induction board.
Call (916) 333-8388 to book cooktop repair in Sacramento with Sayed Sajadi, California License #48671. You get one licensed, EPA-certified technician who works gas, electric, and induction, a written price before any work, the diagnostic fee waived with your repair, genuine OEM parts, and a 1-year parts warranty. Same-day appointments are open in most cases.
📞 Call us Today or Schedule Now to get every burner working again.
Most cooktop repairs run $120 to $500 in parts and labor. A gas igniter or electric element is on the lower end; an induction power board or a glass replacement is at the top. You get a written price after the on-site diagnosis, and the service-call fee is waived when you proceed with the repair.
A small surface chip can sometimes be stabilized, but a crack running across the cooking zone means the glass top needs replacing, not repairing. Stop using a cracked cooktop, since moisture can short the electronics below. On many models the glass is a replaceable part, so you don't need a whole new unit.
The most common reason isn't a fault, it's cookware. Induction only works with magnetic pans, so if a magnet won't stick to your pot, it won't heat. Center the pan and use the right size. If compatible cookware still won't heat and the breaker is fine, the coil or power board has likely failed.
A burner that stays on high regardless of the dial is a shortened infinite switch stuck in the full-power position. It's a safety hazard that can scorch food and stress the element, so stop using that burner and have the switch replaced before running it again.
Clicking with the knobs off is usually moisture in the spark switches after a spill or cleaning, or a shorted ignition switch behind a knob. If drying the area doesn't stop it within a day, the switch needs replacing to stop the constant arcing.
Glass top replacement runs about $200 to $600 on an electric unit and $300 to $1,000 on an induction model, where the touch sensors are built into the glass. The exact cost depends on your brand and model. We confirm whether your cooktop takes a replacement glass top before quoting.
Often, yes. A dead zone usually means a failed induction coil or power board, and unresponsive controls point to the control board, both replaceable. But a cracked glass surface on an induction unit usually has to be replaced, because the crack can damage the integrated sensors.
