Blog
Dryer Timer and Control Board Issues: Diagnosis and Solutions
Fair Appliance Repair Service – Trusted Dryer Repair Experts in Sacramento, CA
Is your dryer stuck on one cycle or refusing to start at all? The problem might lie in the dryer timer or control board, which is essential for proper operation. At Fair Appliance Repair Service, we've helped countless homeowners across Sacramento, Elverta, Roseville, and Woodland diagnose and fix these issues efficiently. Here's your complete guide to identifying, troubleshooting, and resolving dryer timer and control board problems.
🛠️ Understanding the Role of the Timer and Control Board
1. What Does the Timer Do?
The dryer timer manages how long each cycle runs. It moves through drying, cooling, and shutting down. If it fails, your dryer may run indefinitely or not start.
2. What Is the Control Board?
The control board is like the brain of your dryer. It handles signals from buttons and sensors. When it malfunctions, you may see odd behavior like incorrect cycle times, failure to start, or no heat during drying.
🔍 Signs Your Dryer Timer or Control Board Is Failing
👉 The dryer won't start or stop.
👉 The cycle timer gets stuck.
👉 The display panel is blank or glitching.
👉 The dryer runs endlessly or shuts off too soon.
👉 No heat during a cycle
If you live in Sacramento or nearby cities, these symptoms are familiar warning signs to watch out for. Ignoring them can lead to larger electrical failures.
🔧 How to Diagnose Dryer Timer Problems
Step 1: Check the Timer Knob
If it's loose, cracked, or stuck, the timer may not advance properly, and a replacement may be needed.
Step 2: Test the Timer Motor
Use a multimeter to check for continuity. No continuity often means the timer motor is defective.
Step 3: Inspect the Timer Wiring
Look for signs of burning, melting, or loose connections. These require professional attention.
💡 Diagnosing Control Board Issues
Step 1: Check for Burn Marks
Unplug your dryer and remove the control panel. Burnt areas or popped capacitors usually signal board failure.
Step 2: Observe for Error Codes
Many modern dryers show specific error codes. You can find them in your user manual or contact a repair technician.
Step 3: Run a Function Test
If buttons or the digital display are unresponsive, your control board may need a reset or replacement.
🏠 Local Dryer Repair in Sacramento You Can Trust
At Fair Appliance Repair Service, we provide expert diagnosis and fast Repair of dryer control boards and timers. We serve:
👉 Sacramento
👉 Roseville
👉 Woodland
👉 Elverta
Surrounding areas in California
📞 Call Now: 916-333-8388
🛠️ Repair vs. Replace: What's Better?
Condition Recommendation
The timer or board is under 5 years old Repair if the part is available
Dryer older than 10 years Consider full replacement
Signs of electrical burning: Always replace
We always advise a cost-effective solution after evaluating your specific dryer model and issue.
🧼 Maintenance Tips to Prevent Future Issues
👉 Clean your dryer vents monthly.
👉 Avoid overloading the drum.
👉 Don't slam the door — it can damage the sensor circuit.
👉 Schedule annual checkups with a local technician.
🧰 Why Choose Fair Appliance Repair Service?
✅ Licensed & insured technicians
✅ Transparent pricing
✅ Local Sacramento-based service
✅ Same-day appointments available
Need Help Today?
If your dryer won't start, keeps running, or shows signs of electrical failure, don't delay. Let the Fair Appliance Repair Service professionals fix it right the first time.
📞 Call 916-333-8388
Book online at: https://farshomeservices.com/services/dryer-repair
